HOW TO SAFE START A MACBOOK G4 FULL

In that case, you are going to need toВ clean the full startup disk on your MacBook Air by deleting some of the files that you arenвЂ™t using, or donвЂ™t need. You can mitigate this problem by saving files to a cloud storage platform or an external hard drive, but you might find those options either impractical or cumbersome. The 128 and 256 GB versions of the Air are really easy to max out, and a full hard drive on my MacBook Air is something that I have been living with since only a short while after I started using one. Black = master.The full startup disk error on the MacBook Air is something that you will probably encounter at some point as someone that owns or works with this laptop. Apple tried to makes things easier by colour-coding the special short ATA ribbon. Note - it is best to swap the drives around (even though it might work without doing so). (If it doesn't - restart holding down the option key and select the new drive as startup disk.) Should you ever need to boot the old drive - just change the jumper settings back - easy. (If new - best to initialize before putting data on it)Д¤ - Shutdown - swap drives around and change the jumper setting on each drive.ДҐ - Power computer up - the new hard-drive should boot.

HOW TO SAFE START A MACBOOK G4 INSTALL

Should you ever need to boot the old drive - just change the jumper settings back - easy.Дў - Open up and install new drive as slave.ДЈ - Power computer up - clone OS X drive to the new hard-drive. The printed sticker on the actual drive should tell you where the jumpers need to be placed on the pins in order to create the desired drive. Usually 'no jumpers' creates a slave drive, and 'one jumper' is needed to create a master. You can make either drive the master or slave by setting the PINS (or jumpers) on the actual drive. The other will have to be a slave (which means you cannot boot from it).

HOW TO SAFE START A MACBOOK G4 FREE

Then using a program like 'Carbon Copy Cloner' (or another similar free downloadable cloning utility) clone your existing startup OS X system files to the new drive. Yes, the easiest way around your dilemma is to install a new drive as big or bigger than the one you currently have. (One thing - I considered simply wiping out the OS9 partition, but after reading horror stories and complicated maneuvers involved based on others' experiences, opted for the bigger hard drive replacement instead.) Any suggestions/instructions would be most welcome. All I want is the new drive to be the Start up disk, and be able to use stuff from my old OSX system without having to re-install everything, if possible. I have an external LaCie 250GB drive to back up files (and clone the old drive(s) using Bombich?), but do not want to make this any more difficult than I need to. I want to know if I need anything other than the original system CD to accomplish this swap. I purchased what is essentially the same drive only with 80 GB.

I no longer need OS 9, but do want the additional space for the start up disk and more in OSX, anyway. I am going to replace the hard drive on a Mac G4 - as you can see below, it has been partitioned and has run out of drive space for the OSX start up disk.

How to safe start a macbook g4